常州联合工具有限公司（LH）Chuangzhou Lianhe Tools Co., Ltd.
常州联合工具有限公司（LH）是一家专业电镀锌镍合金的电镀企业，位于江苏省常州市武进高新区西湖路9号联合工业园9号厂房，交通便利，距离沿江高速公路武进（常州南）出口不到1公里。公司注册资金310万元，厂房面积4000平方米，自行配套废水处理站，废水处理量为100吨/天。镀种有锌镍合金，锌；滚镀，挂镀均可；可以进行电泳加工。现在已建成5条自动生产线，能满足客户的多方面电镀要求，本公司已于2008年通过清洁生产绿色企业证书。现在进行ISO/TS16949:2009和ISO9001:2008的评审，大约在2010年1月通过。 LH is an enterprise specialized in the electro plating of zinc-nickel alloy. LH is located in the Wujin High-tech Zone, which is less than one kilometer from the Wujin entrance to the Expressway along the Yangtze River. LH has a registered capital of 3,100,000 yuan and a workshop area of 4,000 squared meters, a wastewater disposal station with a handling capacity of 100 ton/day. Our service includes electroplating of zinc-nickel alloy and zinc, both in barrel electroplating and rack electroplating, as well as electrophoresis process. Now LH has five automatic production lines. LH has got a certificate of green enterprise for processing cleanly. Now LH is going through the appraisal of ISO/TS16949:2009 and ISO9001:2008, which will be finished by the January of 2010.
一.主要电镀生产线 Main Electroplating Production Lines
1.挂镀锌自动线（34000升）Rack Electroplating of Zinc Automatic Line
2.挂镀锌镍合金自动线(2500毫米长，1500毫米深，900毫米宽镀槽共6个，每槽悬挂电镀工件面积为4平方米，电镀时间40分钟，) Rack Electroplating of Zinc-nickel Alloy Automatic Line
3.悬挂链式固化烘道 Suspended Chain Oven Tunnel for Solidity
4.滚镀锌镍合金线（1500升，两个滚筒，普通产品100公斤/小时）
二.部分电镀，电泳产品 Electroplating and Electrophoresis Products
挂镀锌镍合金+三价铬透明钝化+封闭镀层厚度为8-15微米，金属镍含量控制在12-15.5%，盐雾试验抗白锈超过240小时，耐红锈超过720小时。符合TL244大众公司要求。Rack Plating of Zinc-nickel alloy + Transparent Passivation of Trivalent Chromate + Sealing，Coating Thickness 8-18 microns,Nickel Content 12-15.5%.Salt Spray Testing Corrosion Resistance of White Rust >240 hours,Corrosion Resistance of Red Rust >720 hours.Meeting the requirements of TL244 of Volkswagon.
挂镀锌镍合金+六价铬彩色钝化。镀层厚度8-15微米，金属镍含量控制在12-15.5%。白锈超过800小时，红锈超过2000小时的高耐蚀性能。Rack Plating of Zinc-nickel alloy + Colored Passivation of Hexavalent Chromate ,Coating Thickness 8-18 microns, Nickel Content 12-15.5%,Salt Spray Testing Corrosion Resistance of White Rust >800 hours,Corrosion Resistance of Red Rust >2000 hours.
紧固件滚镀锌镍合金+三价铬透明钝化+封闭。厚度8-15 微米，金属镍含量控制在12-15.5%。盐雾试验抗白锈超过240小时，耐红锈超过720小时。符合TL244大众公司要求。Barrel Plating of Zinc-nickel Alloy Fastener + Transparent Passivation of Trivalent Chromate + Sealing，Coating Thickness 8-18 micrometers, Nickel Content 12-15.5%Salt Spray Testing Corrosion Resistance of White Rust >240 hours，Corrosion Resistance of Red Rust >720 hours，Meeting the requirements of TL244 of Volkswagon.
符合TL196的汽车配件电镀锌镍合金+黑色阴极环氧电泳漆产品。Auto Accessaries Meeting the requirements of TL196.
Electroplating of Zinc-Nickel Alloy + Black Cathodic Electrophoretic Coating of Epoxy Resin
三.检测设备 Inspection and Testing Equipment
荧光测厚仪FISCHERSCOPE X-RAY用于测量涂镀层厚度及成分，分析合金成分，测量镀液主盐离子浓度。X-ray Fluorescence Coating Thickness Gauge。Measuring the thickness of coating and its contents, analyzing the contents of alloy, measure the thickness of salt ion concentration in the electroplating solution.
符合汽车行业配套要求的250型盐雾试验箱。Salt Spray Tester。Meeting the requirements of Auto industry
为配合汽车行业产品的高要求，我公司严格按照合格实验室的要求对企业内部的检测仪器每年校正，分析,质检人员经常进行业务技能的培训和考量，做到指导生产，严把质量关，同顾客的要求相一致。我公司对顾客的所有要求的性能负责.使用符合ISO/TS 16949 要求的合适工具来保证顾客规定的检查要求。To meet the high quality requirements of auto industry, LH calibrates our testing equipment strictly according to the rules of qualified laboratory. Quality control team receives frequent skill training and checking. LH is responsible for the quality of our products.
常州联合工具有限公司(LH) Changzhou Lianhe Tools Co., Ltd
联系人Contact：庄东平 Zhuang Dongping
手机Mobile Phone：13584500955
邮箱E-mail：[email protected]